The pulp technology of the egg-holding machine is very important to the performance of the product, the pulping process originates from the pulping process of the paper mill, but it is different from the modification process, the requirement of the fiber for the pulp moulding products is not exactly the same as that of the papermaking agent. If the fiber products can not meet the requirements of molded pulp products, will affect the strength and cushioning properties of molded pulp products. The use of hydraulic pulp machine to scrap newspapers, corrugated cardboard packaging, such as the scraps of scrap, such as the material bundled with a long strip of the form of impurities wrapped in the noose machine led to remove, clear. The weight catcher at the bottom of the hydraulic pulp machine is discharged regularly and the heavy dirt is excluded. After breaking the coarse pulp in the slurry tank storage, through the slurry pump sent to the Konig slag, good slurry sent to the complex fiber separator further screening, separation, ease. such as the production slurry beating degree requirements of the pulp molding industry packaging products, you can save the beating or grinding process.
Pulp Molding high-grade packaging line production process is: first of all, workers will be raw materials into the pulp machine, finish pulping, and then automatically injected slurry into the automatic molding machine slurry box, and then will be fully automatic completion of molding, drying, hot pressing process, the finished product automatically sent out, the manual packaging can be.
Pulping this link, regarding does not need to add other additives or does not need to adjust the paste the commodity, this one is very simple, but if you want to add additives or need to adjust, this step is also very important, because the addition of additives means that the general egg can get other new functions (such as waterproof), so to strictly control the weight of the additive, The function is then made more rational, which requires the sizing to be done, and then the task becomes complex and important. Forming this link, the importance is also very big. And why? Because in the molding process, mainly after the pulp adsorption molding, here there is a question about the quality of the egg, that is, adsorption is not (vacuum), then the quality of the goods will be greatly discounted (such as the egg is bad, impatient, not very much), which is not adsorbed and formed, the absorption of the force from the suction pump, is also the dehydration of the force, too large to form a simple mold damage, too small formation quality is too poor, so the control of suction is particularly important.
egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine egg tray machine