Automatic Carton Box Paper Egg Tray Machine

Automatic Egg Tray Machine (Paper Pulp Moulding Machine)

In the machine parts of the entire assembly line, there is no doubt that the eight-sided rotary egg tray machine is the most important component, but how to identify the eight-sided rotary egg tray machine? Hongrun Machinery will share it for you.

1. The customer can ask the manufacturer to start the host to identify the stability. When the eight-sided rotary egg tray machine is in normal operation, there is no vibration, no setback, stable running at a constant speed, no noise.

2. Positioning accuracy. Rotate the main machine to observe the matching gap between the forming mold and the transfer mold. The gap between the forming mold and the transfer mold is consistent. Observe the four corners of the mold contact surface. The gap is 1 mm for the best fit clearance. If the selected mainframe is multi-faceted Machine, turn to see if the gap between each surface forming mold and the transformation mold can achieve the best clearance requirements.

3, the material selected by the host of the eight-sided rotary egg tray machine is reasonable. First of all, the mainframe shelf should choose the national standard channel steel as the support part of the main machine. The main shaft type of the main machine chooses 45# solid carbon steel. This steel torque and toughness are The best is the best choice for the main axis class. The template and the sink are best chosen for corrosion-resistant and lightweight materials.

4, the key components of the main engine operation gearbox, gearbox for Taiwan technology, stable operation, high positioning accuracy, long service life, etc., the gear box is maintenance-free within five years.

5, dehydration sealing assembly parts should choose wear-resistant materials, choose brass and stainless steel as the sealing disc, these two materials are the best corrosion-free wear-resistant type!

production material

Paper tray (egg tray) materials: waste paper, waste newspaper, waste paper box, waste paper and paper tailings.

Drying fuel: coal, wood, diesel, natural gas, liquefied petroleum gas, etc.

Purpose:

Our Automatic Egg Tray Machine (Paper Pulp Moulding Machine) uses waste paper as raw material to make paper pulp egg trays, egg cartons, egg boxes or other paper pulp industry packages.

Rated Capacity: 1100trays/hr for making 30-cavity flat egg trays

Characteristics:
Full-automatic: Controlled by PLC, our Automatic Egg Tray Machine (Paper Pulp Moulding Machine) is full-automatic egg tray moulding machine that can save labor cost for our customers.

Mold plate rotating: Our egg tray molding machine is mold plate rotating machine, the mold plate rotating machine is more advanced than the up and down type. When the mold plate leaves or comes back to the pulp chest, it rotates simultaneously. So the remnant pulp in the mold plate will flow from the mold plate into the pulp chest. The result is the wet egg trays or cartons will contain less water and it will be easy for drying.

Water spraying device is equipped: There is water spraying device in our egg tray production machine. When the rotated mold plate leaves the pulp chest, the water spraying device will spray water to the egg trays or cartons on the molds to brush away burrs on the egg trays or cartons. The spray will make the egg trays or cartons more even and straight. At the same time, the spray will brush away the pulp that stuck at the edge of the molds to ensure precision of mold closing.

Drying burners are equipped: Our egg tray making machine equips burners as heat source that are on the top of the drying tunnel to supply hot air to increase the temperature inside of the drying tunnel so that to dry the wet product (egg tray). These burners consume diesel oil or gas as fuel. So our customer does not need to buy any additional heat source.

Diverse kinds of pulp product can be produced: By changing relevant molds, our pulp molding machinery can make many kinds of pulp trays, such as egg trays, egg cartons, bottle trays, electric spare part trays, fruit trays, etc. I.e. our pulp molding equipment is multi-purpose pulp moulding equipment; it also can be used as egg carton machinery, egg crate machinery, apple tray machinery, bottle tray machinery, etc.